As time passes and you continue to use your tankless water heater, minerals can begin to accumulate that will build up and start to erode the tank’s interior heating chamber. In order to maintain your tankless water heater effectively, you will have to flush and then remove these mineral deposits from the tank. This needs to be done, at the least, once every year. One of the effective methods for doing this is to use Scale Blaster as a tankless water heater descaler.
The steps to effectively descale your tankless water heater are highlighted here.
Use the Tankless Water Heater Descaler after Turning off the Power
When you plan to use Scale Blaster for your tankless water heater descaler, you will first have to shut down the main gas source. If you have an electrical device, then you will have to turn off the primary circuit breaker.
Close then Turn Off the Water Valves Prior to Using the Tankless Water Heater Descaler Product
When you begin to apply the Scale Blaster product, you should turn off the three different water valves. When you do this, it will prevent the cold water from flowing into the water heater, which will also prevent any hot water from being expelled during the cleaning process. The valves you will turn off include a cold water valve, hot water valve and then a third main valve that will run the water into your house.
Effectively Descale Your Tankless Water Heater
If you have never worked with your home’s plumbing before, you will need to call a professional plumber for assistance. They will be able to ensure that the Scale Blaster is properly used for the cleaning process. The fact is that not all tankless water heater descaler products are created equally. Additionally, if they are not used properly, they will not be effective in removing the mineral build-up inside of the tank. In this instance, the entire process would have been pointless, since the tankless water heater would still have the build up inside.
When you use the Scale Blaster product, you will be able to see immediate results; however, only if it is used properly. Be sure to read the instructions and ensure that all power is cut to the tank prior to proceeding with the process. This will provide you with the best chance for the descaling process to be successful. When you do this, you will see a huge improvement in your water quality, which means that you will no longer have hard water issues in your home when using hot water.